In Stock
V1 V2 V3 Headlight / Front Sidemarker Overlays fits 2022+ WRX
In Stock

V1 V2 V3 Headlight / Front Sidemarker Overlays fits 2022+ WRX

Brand:

StickerFab

SKU:

22WRXHL2-DS1

$9.99
$9.99
Sale

Shipping calculated at checkout.
Color:
Set:

Quantity:
Fitment
Shipping and return
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return. To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.

Product details

  • Three versions for different looks
  • V1 covers a large portion of the side of the headlamp
  • V2 covers the same large portion of the headlight + the top
  • V3 covers a smaller area of the side (good for Limited and still looks great on Base + Premium

2022+ WRX Headlight / Front Sidemarker Overlays

Sidemarker overlays and eyebrows are pretty popular aesthetic mods for a vehicle.  These knock out some of the bright orange in the headlights and wraps around the top of your headlight to visually change it up.

V1 - partial cover, only covers side

V2 - covers side and top

V3- partial cover, only covers side (smaller than V1, appropriate for Limited headlights and still looks great on normal headlights)

NOTE:  On Limited models the V1 appearance will look different due to their internal design. 


AVAILABLE MATERIALS

  1. Dark Smoke -  Standard dark smoke material.  Made in Germany.
  2. Light Smoke - Standard light smoke material.  Made in Germany.
  3. Black - Supercast film that will only let a small amount of light through when backlit.
  4. Dark Smoke Stealth - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Made in the USA.

INSTRUCTIONS

Desired temperature for work environment:  70-85 degrees,

Clean the application and surrounding areas prior to applying.  We recommend the following items for installation:

Make sure there is no wax on the lens.  You can wet the back of the vinyl with a few drops of dish soap in a cup of water.  This allows you to slide the vinyl around into the right position.  Once you have found that position, use your fingers to push out the soapy water.  Allow to dry.  LOW heat can be used to dry out the vinyl quicker.


Benefits of working with us

Guaranteed Fitment

Always the correct part

In-House Experts

We know our products

Added Value

Mounting, Balancing

Worldwide Delivery

Free shipping on all orders