TiC Stage 234 Destroker TRACK Short Block - EJ25
Brand:
Turn In Concepts
SKU:
1001-03-0203
Quantity:
Couldn't load pickup availability
Product details
Made To Order! Please read this!
Each and every shortblock is built to order and we make changes to it based upon what YOU are going to do with the car. So two things to note:
1) Once ordered you will receive an email from us so that we can discuss your current and future needs to make sure this block is the correct fit for you and your build.
2) Because these are built to order there is a bit of time before we get it shipped out the door. When we talk we can give you a better timeline based on what specific parts we've swapped based on our discussion, and where you are at in the queue.
While our 2+2 and 3+2 blocks were kicking butt and taking names, Clint & Michah @ 3MI Racing were scheming, sort of like evil masterminds, but for the betterment of the Subaru racing game as a whole. You see, there was a divide amongst the EJ25 and EJ20 guys, torque vs high revving, USDM vs JDM, etc etc, and while we love a good debate, we were looking to come up with one EJ to rule them all. Lots of math, late night discussions, and testing later, we had a test block and put it into Mike Aumick's racecar. Well, good news and bad news, as with anything. Good news was it was great, and there was little to no drop off in torque, AND it made power all the way to redline (which was now higher). Bad news was it made all the non-destroker engines feel slow by comparison.....good problem to have to be honest. So, just like a certain hot sauce, we starting putting those blocks into everything that saw any sort of track time!
Every single Turn In Concepts shortblock starts with a fresh, brand new case. Before assembly every single shortblock has a final clean in our industry leading ultrasonic cleaner, and followed with a white-glove hand clean. Every single shortblock is hand assembled in our environmentally controlled engine clean room which features dedicated air handling and is kept at 68F year round.
Our destroker motors only start at the "Stage 2" level, with upgraded pistons and rods, which are necessary for the higher horsepower and revving you'll be seeing to take advantage of this setup. This is the TRACK motor, which is built for, you guessed it, track use! The high revving nature of the destroker engines mean you are probably going to want upgraded heads etc to match, so send us an email and we can make sure you are sorted!
- New Subaru EJ257 case halves
- New Subaru EJ20 crank
- Callies +2mm H-beam rods with ARP2000 hardware
- JE 99.75mm Subaru Time Attack "FSR" pistons
- Heavy duty tool steel wrist pins
- Dynamically balanced rotating assembly
- ACL main and rod bearings
- Custom ring gaps based upon your input on use of the car
- Custom piston to wall clearance based upon your input on use of the car
- Custom main and rod bearing clearances based upon your input on use of the car
- Rated for 550awhp (case is the limiting factor)
-
12 month/ 12k mile warranty
*If using D25 heads you must use a slightly thicker head gasket due to the smaller combustion chamber. We recommend JE .039" head gaskets, or THIS Cometic gasket.
Benefits of working with us
Guaranteed Fitment
Always the correct part
In-House Experts
We know our products
Added Value
Mounting, Balancing
Worldwide Delivery
Free shipping on all orders