In Stock
3D Carbon Speedometer Cluster Overlay - 2022+ Subaru WRX
In Stock

3D Carbon Speedometer Cluster Overlay - 2022+ Subaru WRX

Brand:

StickerFab

SKU:

22WRXSPDHOOD-3DB

$17.99
$17.99 $21.95
Sale

Shipping calculated at checkout.

Quantity:
Fitment
Shipping and return
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return. To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.

Product details

  • Premium 3D carbon fiber VINYL overlay — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part
  • Protects a damage-prone panel — shields the factory trim from scuffs, scratches, and everyday wear while adding a carbon look
  • Precision-cut to fit — made to match the factory contour for a clean, low-profile look
  • Wet-install friendly — reposition with StickerFab fluid, then set with light heat for a bubble-free finish
  • Made in the USA — cut to order by StickerFab in Fort Myers, FL from premium US/Euro-sourced vinyl
  • Fits 2022+ Subaru WRX — precision-cut for a clean, factory-look fit

3D Carbon Speedometer Cluster Overlay - 2022+ Subaru WRX

Protect a scuff-prone factory trim panel and add a deep, textured carbon look — with a premium 3D carbon fiber vinyl overlay, precision-cut to order by StickerFab in Fort Myers, FL for the 2022+ Subaru WRX.

3D carbon fiber vinyl overlay — 3D Carbon Speedometer Cluster Overlay - 2022+ Subaru WRX

Just so it's clear: "3D Carbon Fiber" is our name for a premium textured vinyl film — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and scuff protection) at a fraction of the cost of a hard part.

Protects a Piece That Takes a Beating

Factory soft-touch plastics and trim panels scuff and scratch far too easily. This overlay takes the abuse for you — it shields the trim underneath from everyday wear while giving it a deep, textured 3D carbon-fiber appearance. You protect the panel and upgrade the look in one step.

Premium Vinyl, Made in the USA

Each piece is cut to order from premium 3D carbon fiber vinyl — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years.

Cut and shipped from our shop in Fort Myers, Florida — a real product made by real people, made to order.
3D carbon fiber vinyl texture close-up — 2022+ Subaru WRX

Not All Materials Are Created Equal

Our 3D Carbon is Dragon Wrap™ Carbon Fiber Film — a 5.6 mil calendered vinyl with a repositionable permanent adhesive on an air-egress liner. Excellent dimensional stability, up to 5-year outdoor durability, and rated excellent for water, humidity, and solvent resistance.

Review below is from a StickerFab customer about a different 3D Carbon product made from this same premium material — shared to speak to the material quality, not this specific item.

"Got them just now, thanks for including a(n) extra set! I've had 2 sets of CF look ones from another seller and silver stars kept peeling and the carbon look faded really bad." — StickerFab customer

🔧 Installation

Minimum application temperature is 40°F. A wet install is recommended: spray the surface and the back of the vinyl with StickerFab fluid so you can slide it into place, work out the fluid from the center outward, then set the adhesive with light heat from a hair dryer or heat gun. Work up the heat slowly — if it would burn you, it can burn the material.

For the 3D Carbon material, do not apply wax — clean with normal soap and water; 303 Aerospace Cleaner further enhances the finish.

Recommended items:

FAQ

Is this real carbon fiber?
No — "3D Carbon Fiber" is our premium textured vinyl overlay. It gives you the deep 3D carbon look and protection of a flexible film, not a hard carbon part.

Will it fit my car?
It's precision-cut for the 2022+ Subaru WRX.

Is it hard to install?
It's a forgiving wet install — reposition with StickerFab fluid, work out the fluid, then set it with light heat.

How do I care for it?
No wax. Clean with normal soap and water; 303 Aerospace Cleaner brings out the deep finish.

Is this made in the USA?
Yes — cut to order by StickerFab in Fort Myers, Florida from premium US/Euro-sourced vinyl.

Benefits of working with us

Guaranteed Fitment

Always the correct part

In-House Experts

We know our products

Added Value

Mounting, Balancing

Worldwide Delivery

Free shipping on all orders