Turn In Concepts Transmission Crossmember Bushings - Most Subarus

This is how TiC does tranny crossmember bushings for the MT Scoobies.

You'll notice a couple of things about our design:

1) They may look pink to the uninitiated. In reality it's cherry blossom red. The color of a warrior. Now you may still think to yourself "It's pink." Go ahead and think that, be sure to remember it when you see a cherry blossom red STi badge quickly getting smaller in front of you.

2) No cutting required to install these. The shape of these is symetrical. Realizing this we came up with an idea - make the bump on one side and a bore on the other. They fit together like the Ying and the Yang. The good and the evil. Luke Skywalker and Darth Vader (although both were whiny brats when they were younger).

What they do: These replace the stock rubber pieces that go between each part of your tranny subframe. Also, unlike the soft rubber ones, these are made of a stiffer urethane.

Why you want them: Think about it - you want to stiffen up the driveline so there's less play in the system.

Have you ever looked at the stock bushings? If not go do so. You'll be amazed at how bubblegum soft they are. You think some play doesn't come from there?

Oh, and did we mention they're cherry blossom red?

NOTE: These will fit 1997-2024 Subarus with a manual trans. For 1997-2007 Imprezas you will not use the thin spacer. For 2008+ Imprezas and 2005+ Legacies you will use the thin spacer that is included.